Quality Heating Elements Manufacturer

Heatingelementsinc have built an unrivaled reputation for electric heating elements quality and reliability over the past 7 years. We formulate highly skilled and experienced personnel working with the finest raw materials. The electric heater, cartridge heater and heating tube we manufacture undergo strict quality control and detailed product testing routines.

If your Kenmore Elite Dryer is running but not heating, it may be time to change the electric heating element. Changing out the heating element is not a difficult task if you have a few basic tools and a little bit of expertise.

Instructions

1. Unplug the dryer. Locate and remove the front service panel on the bottom of the Kenmore dryer, located at the bottom of the dryer. The entire panel will pop off.

2. Remove 1 wire that runs from the heating element and test it by using a volt/ohm meter. You only need to remove 1 wire. This will provide enough ohms for a correct reading. If you are getting a zero reading, then the heating element is bad and should be replaced.

high density electric cartridge heater

3. Take the heat shield off by pulling off the wires and removing the screws that secure the heating element in place. This will free the element. Remove the heating element.

4. Replace the heating element with a new element. Make sure it is securely in place and then screw the element back into the housing and reinstall the wires.

******************************************************
Wish for good friends for better business & life.
www.heatingelementsinc.com – Leading Heating Elements Manufacturer

cnxsf.en.alibaba.com is our products showroom on alibaba.com.

******************************************************

5. Reassemble the dryer by putting the front service panel back on. Plug the dryer back in, push it back into place and turn it on. Allow it to run for a few minutes to test the new element.

 

Heating Elements Applications Related Articles

 

Heating elements information center

 

Knowledge base for cartridge heater

 

 
Drinking Straws Are Made Using Heating Elements

Incoming search terms:

• remove element kenmore elite electric dryer
• kenmore elite dryer heating element replacement
• remove heater element kenmore elite
• how to remove heating element from kenmore elite dryer
• how to replace a sears dryer heating element
• remove heating elmenet kenmore elie dryer
• reassemble kenmore elite heating element dryer
• kenmore elite electric dryer remove heating element
• kenmore elite dryer remove heating element housing
• how do i change a kemore elite heating element